
Price: $69.00
(as of Feb 06, 2025 06:27:51 UTC – Details)
Product Description
Digital Signal Transmission Technology, No More Interference Noise
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
Lark C1 USB Type-C Version Wireless Microphone ss Designed for Mobiles-Compatible with All USB-C Android devices and iPhone 15 series, iPad(with USB C Interface). Android Version was also Compatible with DJI Action2, Action3. Makes Content Creators Have More Possibilities.
Up to 15 dB depth noise canceling, Providing a clear and clean audio performance.
Long-Rang Transmission, Still Stable and Clear
Incredibly low latency of 0.08s, 656ft transmission distance just as heard beside.
8H:Single TX:
32H:With Charging Case when fully charged
RX only 7g, thickness lower than 9mm, Lightweight and not bulky when plugged into your mobile.
48 kHz sample rate and 16 bits depth, Deeply deduction rich sound details for you.
1 OneClick Noise Cancelling 2 656ft Transmission 3 32H Battery Life 4 Still Ultra Compact 5 Hi-Fi Sound Level Quality
Speaker Play with RX Plugged
Don’t need to plug out the RX, you can still easily playback and monitor your video, greatly improving your creating efficiency and saving you time.
Charging your Mobiles Via RX-Nonstop Recording
RX can be connected to your mobile charging cable and charge for your mobiles. Never need to worry about the low battery when working.
LarkSound App Supported
You can download the “LarkSound” APP to Monitor your audio collection, adjust noise canceling level, and volume control.
For iPhone 15 or iPhone 15 Pro Series, the Lark C1 Android Version can be used to connect with your iPhone and record. But please notice that Charging your phone through the receiver and LarkSound App can not be used. Or please use an official USB-C to Lightning Adapter (NOT included) to connect the RX (iOS Version) to your iPhone.
Does the Lark C1 compatible with the iPhone 15 (Pro Max)?
Yes, the Lark C1 Type-C version can be used with the iPhone 15 (Pro Max). However, it can not be used with the LarkSound App, and the phone is unable to be charged via the receiver.
Why does it show ‘No Device is Connected’ while the receiver is plugged into my device?
1. Please make sure the microphones are paired with the receiver successfully. (the lights will not flash) 2. It may take a few seconds for the App to recognize the device. 3. Please try to unplug and plug the receiver from your device again.
This device can not connect to Bluetooth, what should I do?
Please note that the device can not connect to the smartphone by Bluetooth. The wireless microphone means the transmission between the microphone and receiver is wireless.
Why there’s no voice when I playback the recordings?
Please manually turn on the Speaker play on the Lark Sound APP. Otherwise, you need to unplug the RX from the mobile phone to play the recordings.
The microphone doesn’t work, and the light is flashing, what should I do?
Press and hold the pairing button on the receiver and microphone for about 3s to enter the pairing mode. Then the indicator on the receiver/mic will flash quickly.
Note: the receiver and microphone need to be in the paring mode at the same time.
Compare With Hollyland Wireless Microphone Series
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.4 out of 5 stars
1,248
4.7 out of 5 stars
3,645
4.4 out of 5 stars
1,248
4.3 out of 5 stars
4,145
4.7 out of 5 stars
792
4.4 out of 5 stars
969
Price
$69.00$69.00
$92.00$92.00
$79.00$79.00
$79.00$79.00
$249.00$249.00
—
Transmission Range (LOS)
200 m (656 ft)
300m(1000ft)
200 m (656 ft)
200 m (656 ft)
250 m (820 ft)
100 m (300 ft)
Sampling Rate
48KHz
48KHz
48KHz
48KHz
48KHz
48KHz
(Audio) Bit Depth
16 bits
24 bits
16 bits
16 bits
24 bits
16 bits
Maximum SPL
110 dB
115dB
110 dB
110 dB
128 dB
112 dB
Internal Recording
✘
✘
✘
✘
✔
✘
Frequency Response
20 Hz-20 kHz
20 Hz-20 kHz
20 Hz-20 kHz
20 Hz-20 kHz
20 Hz-20 kHz
20 Hz-20 kHz
Wireless Transmission
2.4GHz AFH
2.4GHz AFH
2.4GHz AFH
2.4GHz AFH
2.4GHz AFH
2.4GHz AFH
Compatibility
Android / Osmo DJI Action2/3
Android / Osmo DJI Action2/3
iPhone / iPad
iPhone / Android / Camera / PC
iPhone / Android / Camera / PC
iPhone / Android / Camera / PC
Volume Adjustment
6 Levels
6 Levels
3 Levels
3 Levels
20 Levels
20 Levels
Plug and Play: Design for Android mobiles with Type-C interface, easy to use, open the case, and ready to use.
Instant Playback Even RX Plugged in: Lark C1wireless lapel microphone support instant playback the video without plug out the RX, greatly convenience for instant monitor your video’s audio.
One-Click Noise Cancelling: Lark C1 features with active noise cancelling function thanks to its excellent algorithmic chips, up to 14dB noise cancelling depth, a prefect solution when recording in outsides or blocking unwanted noise, which greatly improved your video’s audio quality.
32H Working Time&656ft Long Rang Transmission: Each TX can be fully charged 3 times when the charging case was fully charged, each TX operating 8hours each time, providing a full-day audio recording. 656ft(200meters) long rang transmission provides more possibilities when working outdoors, long rang enough, excellent audio collection performance.
Still Ultra Light Weight&Compact: Each TX was 11.5g, RX 7g, and thickness lower than 9mm. This unique form factor allows you to inconspicuously clip the TX on your coats and easily plug the RX into your mobile phone.
Customers say
Customers praise the microphone for its good sound quality, ease of use, and quality. They find it simple to set up and connect, ready to use right out of the box. Many customers appreciate its value for money and battery life. However, some have differing opinions on its functionality, microphone functionality, and connectivity.
AI-generated from the text of customer reviews